RTS Bearing Puller Tool, Crown Wheel And Pinion Bearing Removal Tool

•  The clamshell carrier bearing puller is compatible with most bearings. With the clamshell bearing puller, you can quickly remove the bearings. In addition, its power is evenly distributed, so less damage will be brought to your pinion bearings.
• Premium Performance & Features: With high working efficiency, this carrier pinion bearing puller can effortlessly remove the pinion bearings with minimal stress , drastically reducing dismantled time. And the carrier bearing puller will no longer easily pry into the pinion's sealing surface.
• Complete Equipment: All necessary parts are ready for you. There is a main puller body, plug, center bolt, 3 clamshells, retaining ring, and adjuster rings. Besides, this unit comes with a handy stand, so you can group all the working parts together.
• Easy to Operate: There is no need for other complex working tools. Firstly, place the main body over the plug and adjust the lower and upper adjusting ring. Secondly, select a proper clamshell and tighten the retaining ring. Finally, you can use an impact gun to remove the bearing.
• You will have your bearings off before you even set up your press for 1 bearing. Time is money for workshops!
• Superior Material: The clamshell bearing tool is made of durable 45# steel, providing good performance in withstanding abrasion, corrosion, and impact. Constructed of high-strength material, it is a robust tool built to last.
• 3 Double side clamshells provide enough sizing options to suit almost any application ,right up to large truck differentials
• Yellow 2.275" / 2.918" are the 2 minimum id's ( bearing needs to be bigger than this dimension )
• Black 2.500" / 3.066"  are the 2 minimum id's  ( bearing needs to be bigger than this dimension )
• White 3.132" / 3.270" are the 2 minimum id's  ( bearing needs to be bigger than this dimension )
• Complete your kit with the optional RTS-6100 Add On , Axle Bearing Puller which comes with an additional clamshell 2.00" / 2.625"